Shop Mackie CFX20 mkII on our Recording Equipment Music Store

Mackie CFX20·mkII

Get a Free CFX20 mkII Mixer Bag with every order! (a $57.99 value!)

Mackie CFX20·mkII Description:

The Mackie CFX20 mkII mixer has been updated with more comfortable Onyx series knobs, new graphics for better visibility in less-than-ideal lighting conditions, and improved durability thanks to impact-resistant rubber side panels that have been added to the entire line. Best of all, CFX.mkII mixers are priced even lower than the popular original CFX models. Available in 12, 16 and 20 channel models, the CFX.mkII Series mixers all feature 4 subgroups, precise 9-band stereo graphic EQs for greater sonic control, and Mackie's high-quality, comprehensive EMAC™ 32-bit(!) digital effects processor. All mic/line channels have inserts and input trim controls with individual Zero Level LEDs, 3-band EQ with swept midrange, and 100Hz low-cut filers. Each channel strip has a 60mm long-taper fader, external & internal/external effects sends; 2 aux sends, pan, mute, solo (PFL), and bus assigns. Like the original CFX Series mixers, the CFX.mkII Series mixers are designed for rugged, day-in and day-out road use.

Mackie CFX20·mkII Features:

High-headroom mic preamps with RF rejection
20 channels (16 mic/line mono, and 2 stereo line channels)
32-bit EMAC(tm) digital effects with 9 reverbs, 4 delays, phaser, chorus, flange; 2 parameter controls + EFX wide spatial expander
External and internal EFX sends
EFX to Monitor control
9-band stereo graphic equalizer
Inserts on all mic channels and main mix
True 4-bus design with direct sub outs and L/R assign
2 Pre/Post Aux sends and internal/external FX level sends on each channel
3-band EQ with swept mid (100Hz to 8kHZ) on mic/line channels
4-band EQ on stereo line channels
Pan, Mute, PFL solo on each channe
Inserts and 100Hz low-cut filters on all mic/line channels
Subwoofer output from built-in 18dB/oct. 75Hz crossover
Ingenious BREAK switch
Headphone output with level control
Tape/CD inputs with level control assignable to Main Mix via Break switch
Logarithmic taper 60mm faders
48V phantom power
12V BNC lamp jack

Mackie CFX20·mkII Specifications:

Frequency Response

Mic Input to any Output Trim at 0 dB

32Hz to 20kHz +0, -1 dB,

Distortion

THD and SMPTE IMD; 20Hz to 20kHz

Mic Input to Main Output: < 0.05% at +4 dBu output

Noise

20Hz to 20kHz BW (150 Ohms source impedance)

Equivalent Input Noise (EIN): -127 dBu

Residual Output Noise (Main, Monitor, & Effects outputs Channel & Master levels off): -95 dBu

Common Mode Rejection Ratio (CMRR)

at 1kHz, Trim at 0 dB

60 dB

Crosstalk

Adjacent Inputs or Input to Output: -90 dB at 1kHz

Fader Off: -90 dB at 1kHz

Mute Switch and Break Switch Mute: -80 dB at 1kHz

Input Level Trim Control Range

+6 to -50dB

Phantom Power

+48V DC

Equalization

Low Cut: 100Hz, -18dB/octave

Mono Channel EQ:

High: ±15dB at 12kHz

Mid: ±15 dB at 100Hz to 8kHz

Low: ±15 dB at 80Hz

Stereo Channel EQ:

High: ±15 dB at 12kHz

High Mid: ±15 dB at 3kHz

Low Mid: ±15 dB at 400Hz

Low ±15 dB at 80Hz

Graphic EQ (9 bands): ±15 dB, Q =1.414

ISO octave centers at: 63Hz, 125Hz, 250Hz, 500Hz, 1k, 2k, 4k, 8k, 16kHz

Mixer Rated Output

Main, Sub, Aux, & Efx: +4 dBu

Maximum Rated Output: +20 dBu

Maximum Input Levels

Mic Input with Trim at +6 dB: +18 dBu

Line Input with Trim at -15 dB: +38 dBu

Insert Return, Stereo Line Input, Tape Input, and Effects Return: +20 dBu

Maximum Voltage Gain

Mic input to

Insert Output: 50 dB

Tape Output: 66 dB

Sub Output: 66 dB

Main Output: 76 dB

Aux Send: 71 dB

Line Input to:

Insert Output: 30 dB

Tape Output: 46 dB

Sub Output: 46 dB

Main Output 56 dB

Aux Send: 51 dB

Stereo Line Input to:

Tape Output: 40 dB

Sub Output: 40 dB

Main Output: 50 dB

Aux Send: 45 dB

Tape Input to Main Output: 30 dB

Effects Return to Main Output: 30 dB

Input Impedance

Mic Input: 3 kOhms, balanced

Line Input: 40 kOhms, balanced

Insert Return, Stereo Line Input, Tape Input, and Effects Returns: 10 kOhms, unbalanced

Output Impedance

Main Output, Insert Output, Tape Output, Sub Output, and Effects Sends: 150 Ohms

Digital Effects

Resolution: 32-bit EMAC processing, 2-channel

Number of Presets: 16

Parameters: 2 controllable

Channel Level Set LED (Sensitivity)

0 dBu (normal operating level)

VU Meters

Main L/R 12 segments: Clip, +10, +7, +4, +2, 0, -2, -4, -7, -10, -20,-30

Weight

CFX12.mkII: 17.8 lbs (8.1kg)

CFX16.mkII: 21.0 lbs (9.5kg)

CFX20.mkII: 24.3 lbs. (11.0kg)

Dimensions

CFX12.mkII: 18.4 x 16.0 x 5.0 inches (467 x 406 x 127 mm)

CFX16.mkII: 22.9 x 16 x 5 inches (582 x 406 x 127 mm)

CFX20.mkII: 26.8 x 16 x 5.0 inches (681 x 406 x 127 mm)

Get a Free CFX20 mkII Mixer Bag with every order! (a $57.99 value!)

Get your Mackie CFX20·mkII today!