AKG WMS40D/HT/PT/44
AKG WMS40D/HT/PT/44 Description:
The AKG WMS40 dual wireless microphone systems provide simultaneous UHF wireless operation of 2 microphones at a cost effective price.
The systems are shipped with either handheld or belt-pack transmitters, this system includes the SR40 dual receiver HT40 Pro handheld transmitter, PT40 body-pack transmitter and C444L head-worn microphone.
The SR40 dual receiver is a half-rack mountable unit with balanced XLR and unbalanced 1/4" phone outputs on the rear.
The receiver features twin internal receiver circuits designed to receive simultaneously. The front panel features dual antenna, volume control and LED indicators.
The HT40 Pro handheld transmitter includes a dynamic cardioid microphone head for maximum signal-to-noise ratio and minimal off-axis noise and feedback.
The HT40 Pro boasts up to 30 hours of power on a standard single AA alkaline battery.
The PT40 Pro body-pack transmitter includes the C444L lavalier microphone.
The C444L is a pre-polarized condenser microphone designed for accurate reproduction of speech.
The convenient head-worn design enables an array of possibilities including fitness instruction, presentation and more.
The PT40 Pro boasts up to 30 hours of power on a standard single AA alkaline battery.
AKG WMS40D/HT/PT/44 Features:
- Dual Wireless Operation
- The WMS40 dual systems enable simultaneous operation of 2 transmitters. This system includes 1 SR40 dual receiver, HT40 handheld transmitter and PT40 body-pack transmitter.
- UHF Operation
- The WMS40 Series features UHF operation for greater range and low drop-out and noise.
- Balanced and Unbalanced Output
- The SR40 dual features a balanced XLR and unbalanced 1/4" phone output connectors.
- Comprehensive LED Display
- The front panel on the SR40 dual features RF reception, Mute and Clip LEDs.
AKG WMS40D/HT/PT/44 Specifications:
System:
- Type of System Rack/Table Top Mountable UHF Diversity System
- RF Carrier Frequency Range US58 / 734.600 MHz
- Approx. Working Range 330 Feet (100 m)
- Overall Frequency Response 65Hz to 20kHz
- Signal-to-Noise Ratio >110 dB(A)
- Of Channels Single channel, single frequency
- Of Simultaneous Systems not specified by manufacturer
Receiver:
- Type of Receiver UHF Half Rack Mount
- Type of Outputs Balanced 3-pin XLR-male, switchable from -30 to +6dB
- Unbalanced 1/4" Phone jack (6.5mm)
- Headphone Monitoring No
- Power Requirements Current Consumption: 115mA/12V
- Power Requirement: 120/230 VAC 50/60 Hz
- Battery Type/Approx. Life not applicable
- Display RF Status, Mute and Clip LEDs
- Mounting Options Table Top / Rack Mount (rack-mount hardware included)
- Antenna Type quarter-wavelength
- Dimensions (W x D x H) 7.8 x 7.4 x 1.7" (200 x 190 x 44mm)
- Weight 5.7 oz (160 g) without batteries
Transmitter:
- Type of Transmitter HT40 Handheld UHF
- Type of Input Connector not applicable
- Type of Microphone Dynamic
- Polar Pattern Cardioid
- Interchangeable Mic Heads No
- Battery Type/Approx. Life 1x AA 1.5-V alkaline battery
- typ. 31 hours (for 2200 mAh)
- Mute Switch Lockable On/Off and Mute available
- Level Control 0-25dB Gain Control
- Antenna Type BNC
- Display Power LED
- Dimensions Length x Diameter 9 x 2.l" (229 x 53mm)
- Weight 1.4 lbs (630 g)
Transmitter:
- Type of Transmitter PT40 Body-Pack UHF
- Type of Input Connector Mini 3-pin XLR
- Type of Microphone C444L Headworn
- Polar Pattern Cardioid
- Interchangeable Mic Heads compatible with AKG microphone featuring 3-pin mini XLR connection
- Battery Type/Approx. Life 1x AA 1.5-V alkaline battery
- typ. 31 hours (for 2200 mAh)
- Mute Switch Lockable On/Off and Mute available
- Level Control 0-25dB Gain Control
- Antenna Type quarter-wavelength
- Display Power LED
- Dimensions 2.4 x 2.9 x 1.2" (60 x 74 x 30mm) (WxHxD)
Get your AKG WMS40D/HT/PT/44 today!
