Electro Voice M-LMH
Electro Voice M-LMH Description:
The Electro-Voice M-LMH is a proprietary signal processing expansion card for insertion into the front panel slot of a P1201, or the dual slots of a P1202 power amplifier. The module inserts EQ, crossover design, and the unique VCP voice-coil protection circuitry, into the signal path between the above mentioned amplifiers, and a variety of manufacturer's P.A. speakers.
The M-LMH is matched to the functionality of a full-range to mid-high range speaker, and offers a low-pass notch filter (LPN) matching the transmission function of the cabinet. Also provided are a 3kHz switchable EQ and flush-mounted operation mode switch. When the module is inserted, the amplifier input sensitivity changes to 0dBu.
Electro Voice M-LMH Features:
- Proprietary expansion card controller module for full-range 12" or 15" 2-way speakers and P1201/1202 Precision Series power amplifiers
- Provides custom EQ, crossover design and custom VCP voice-coil protection circuit for various P.A. loudpseakers
- Designed for Full-range and mid-high speakers
- PCB-mounted 1-in-2 switch allows independent 2-channel drive of P1202 amplifier with single card
- Calibrated level control knob, full dedicated LED function indicators
Electro Voice M-LMH Specifications:
- Speaker Type: 12" to 15" 2-way
- Function: Full-Range/Mid-High
- Frequency Response: 25 Hz - 50 kHz (Full-Range, -6dB)
75 Hz - 50 kHz (Mid-High, -6dB) - Gain Range: -85dB to +6dB
- Signal-to-Noise Ratio: <105dB
- THD + N: <0.05%
- Controls and Indicators: 1 x Calibrated Level Knob
1 x MID EQ Switch 1 x 1-in-2 PCB Board Operating Mode Switch
1 x VCP LED
1 x Input LED
1 x MID EQ LED
1 x Operation Mode LED
2 x MID-HIGH/FULL RANGE LED's - Dimensions (HxWxD): 1.7 x 4.7 x 5.6" (43.6 x 120 x 142mm)
- Weight: 5.2 oz(148 g)
Get your Electro Voice M-LMH today!
