Audio Technica AT822 Product code: AUDAT822 Manufacturer: Audio Technica Price: $270.64 
| | 5% discount coupon: Enter AFF01 at checkout for 5% off any purchase |
|

Audio Technica AT822 Audio Technica AT822 Description: Compact and lightweight design is perfect for camera-mount use. Closely matched elements provide the spatial impact and realism of a live sound field and excellent channel separation. Features a switchable low-frequency roll-off. 2 cardioid elements. Frequency response: 30Hz-20kHz. Battery powered. Audio Technica AT822 Features: - Compact and lightweight design
- Closely matched elements provide the spatial impact and realism of a live sound field and excellent channel separation
- Switchable low-frequency roll-off
- 2 cardioid elements
- Frequency response: 30Hz-20kHz
Audio Technica AT822 Specifications: - ELEMENTS Fixed-charge back plate, permanently polarized condenser
- POLAR PATTERN X/Y Stereo
- FREQUENCY RESPONSE 30-20,000 Hz
- LOW FREQUENCY ROLL-OFF 150 Hz, 6 dB/octave
- OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa
- CHANNEL BALANCE <=2.5 dB
- IMPEDANCE 200 ohms unbalanced
- MAXIMUM INPUT SOUND LEVEL 125 dB SPL, 1 kHz at 1% T.H.D.
- DYNAMIC RANGE (typical) 101 dB, 1 kHz at Max SPL
- SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
- BATTERY TYPE 1.5V AA/UM3
- Warning: The AT822 is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
- BATTERY CURRENT / LIFE 1.2 mA / 1000 hours typical (alkaline)
- SWITCH Off, flat, roll-off
- WEIGHT 5.8 oz (165 g)
- DIMENSIONS 7.76" (197.0 mm) long,
- 2.44" (62.0 mm) maximum head width,
- 0.83" (21.0 mm) body diameter
- OUTPUT CONNECTOR Integral 3-pin XLRM-type
- CABLES 1.7' (0.5 m) long, 3-conductor, shielded, vinyl-jacketed, stereo cable with 3-pin XLRF-type connector at microphone end, 3.5 mm stereo mini plug at output end.
- 10.0' (3.0 m) long, 3-conductor, shielded, vinyl-jacketed, stereo cable with 3-pin XLRF-type connector at microphone end, two 3.5 mm mono mini plugs with 1/4" phone plug adapters at output end.
- ACCESSORIES FURNISHED Gun-grip snap-in stand clamp for 5/8"-27 threaded stands; camera shoe mount adapter; battery; AT8120 windscreen; soft protective pouch
- AUDIO-TECHNICA CASE STYLE S3
Get your Audio Technica AT822 today! 
All brands and product names are trademarked or registered trademarks of their respective companies. Prices, specifications, and availability are subject to change without notification. E.&O.E. Image & Description provided by and used with permission from Music Unlimited (InstrumentPro.com). Page revised: Sunday, January 4, 2009.
This page is at http://www.musicenter.com/go/audat822 |
| |