Rane ECB 62e Master Base Unit
The ECB 62e is the master controller for the ECM 82e Mixers. There are six Ports on the internal audio bridge with each Port consisting of a digitally selected five input audio mixer configured with the Port page in RaneWare. Global ECS controls are on the System page. This configuration disallows the connection of an Input to its Output, avoiding possible feedback (except Port 5). Each Port Input also provides for a selective automatic level control.
The ECB 62e can accomodate one to six ECM 82e Mixers (8 channel mic or line mixers) on Port 1. The five other Port Inputs allow any other line level audio signals. The programmable parameters for the ECS are stored in non-volatile memory (no batteries).
The ECB 62e comes with a security cover and remote power supply.
ECS 62 Optional Plug-in card
The ECS 62 is a plug-in card allowing the ECB 62e to accommodate stereo audio inputs.
The ECS 62 installs by temporarily removing the top cover, and seating the card on top of the motherboard. Front panel trims are now accessible through a security panel, and additional connections become available at the rear panel.
Mono jumpers are provided on the Port Outputs for either mono or stereo sources. The ECS 62 module is designated as the left channel, while the ECB 62 euroblocks constitute the right channel.
